Flowline LI90 Commander - Manual (Page 31)

27 AUG 08 PRELIMINARY MANUAL 31 of 57
Rev 1_3 Commander LI90 Series
o
In the Relay Info screen, pressing the upper right soft key will jump the screen to
the HAND / OFF / AUTO (H.O.A.) functions for each relay.
• The H.O.A. screen for each relay will indicate each relay, the current
status of each relay and soft keys to jump back or to the next relay
• AUTO – This mode places the relay in automatic. Relay will
energize based upon the ON setting and will De-energize based
upon the OFF setting.
• OFF – This mode turns the relay OFF (de-energized). The ON
and OFF settings are ignored in this mode. This mode is helpful in
taking a relay off-line for maintenance.
• HAND – This mode turns the relay ON (energized). This mode is
helpful in overriding a relay function. Relay will be energized
until
o
The OFF is selected or
o
When the AUTO mode is selected and the level drops
below the OFF setting
o
Pressing the lower right soft key (Next) will return the controller to the opening
screen