Controlled Products Systems Group H10NX - Manual (Page 33)

VIKING TECHNICAL SUPPORT 1.800.908.0884 3 1
Anti-Tail Gate, Open Commands & Guard Station
! TECHNICAL TIP:
For more information regarding accessory connections and terminal
functions, refer to “Appendix (A)” on pages 42-43.
ACCESSORY CONNECTIONS
“ATG” Anti-Tailgate
This input will stop the
gate when the vehicle
triggers the sensor, then
closes the gate when the
vehicle leaves the sensor,
preventing unauthorized
vehicles from entry.
Guard Station
!
All three buttons must be a
Normally Open “N.O.” type of
switch, and can share the same
common “C” connection to “GND”.
Open Commands
“Exit”, “Fire” and “Strike” input terminals
all provide an open command to the
control board. Any device connected as
shown will open the gate.
COM
N.O.
+ -
- + +
-
COM
N.O.
COM
N.O.
N.O.
COM
+ -