Biological heat blue indicator light – Luminex 100 IS User Manual, Version 2.1 User Manual
Page 22
Luminex 100 IS User Manual Version 2.1
x
MAP Technology
2 - 8
PN 89-00002-00-070 Rev. A
Biological
Heat
Blue Indicator Light
The blue light above the Sample Arm simply indicates the on/off 
status of the instrument, and is harmless. The blue light-emitting 
diode (LED) does not emit light in the UV spectrum.
Warning:
Human/animal samples may contain biohazardous
infectious agents. Where exposure (including aerosol) to 
potentially biohazardous materials exists, operators should follow 
appropriate biosafety procedures and use personal protective 
equipment, such as gloves, gowns, laboratory coats, face shields 
or masks, and eye protection and ventilation devices. 
Observe all local, state, and federal biohazard handling 
regulations when disposing of biohazardous waste material.
Warning:
The heater plate of the optional XYP instrument may be
hot and could cause personal injury if touched. Do not touch the 
heater plate.