Luminex 100 IS User Manual, Version 2.1 - Manual (Page 72)

100 IS S Users Manual Version 2.1 x MAP Technology
7 - 8 PN 89-00002-00-070 Rev. A
Both template and manual commands appear on the status bar as the
system processes the command. Errors also appear in the message
log.
The Diagnostics tab should turn red if the system encounters an error.
The message log on the Diagnostics tab should indicate where the
error occurred.
Status Communication
The table below shows details regarding typical messages that appear
in the status bar.
Total Events/
Second Number of total bead events detected per
second
Region
Events/
Second Number of sample reactions detected per
second
Table 1. Status Bar Color Coding (Continued)
Table 2. Status Bar Communication Message Details
Status Bar
Color
Message Indicates
Green Idle This term appears when the
instrument is ready and waiting
for a command from you.
Standby This term indicates that the
analyzer is ready and waiting for
a command to perform.
Yellow Connecting This term appears when the
software attempts to connect to
the instrument.
Processing This term appears when the
instrument communicates with
the software as it processes
commands.
Pausing This term appears when the
software asks the instrument to
stop processing the list of
commands and the instrument
finishes up the active command.