Danger – Diamond Products HCH50 User Manual
Page 11
Advertising
Operating instructions
Product description
HCH5011 / 001
1-5
1.2.2
Noise level
Depending on the working environment, the Chain saw HCH5011 can
cause excessive noise during operation.
The noise can permanently harm the hearing of operating personnel and
of other people nearby within a short time.
Ear protectors must therefore always be worn while working.
1.2.3
TYROLIT Hydrostress AG- Bar
1.2.3.1
Bar 20“ (Chain saw HCH5011)
1.2.3.2
Bar 16“
Danger
Noise danger
When using the Chain saw HCH5011 hearing protection must be
worn.
If this instruction is not followed irreparable hearing damage may
result.
Length / Cutting depth
20“ (approx. 50 cm) / 42 cm
Width
85 mm
(75 mm without chain)
Length / Cutting depth
16“ (approx. 40 cm) / 32 cm
Width
85 mm
(75 mm without chain)
Advertising