Diamond Products HCH50 - Manual (Page 20)

Safety instructions Operating instructions
2-6 HCH5011 / 001
2.5 Generally applicable warnings of residual
dangers
In the following warnings of residual dangers are shown that are generally
applicable to all work (with and on the saw systems and during all phases
of the life of the systems).
Danger
Electric shock due to defective electronic equipment.
The electrotechnical equipment must be checked prior to each use
and from time to time during prolonged usage. Defective parts
such as cables and plugs must be exchanged by electrotechnically
trained personnel in the powered down state.
Failure to comply with this regulation may lead to serious physical
injury or death. Secondary damage such as fires may also occur.
Warning
Danger from sharp tool edges.
Touching a tool whilst it is still in motion is prohibited.
When touching tools at a standstill it is recommended that
protective gloves are worn.
Failure to adhere to this regulation may result in cut wounds to the
hands.
Warning
Danger of allergic reactions if skin comes into contact with
hydraulic oil.
Persons who have an allergic reaction to hydraulic oil must wear
protective gloves and goggles when carrying out work where they
come into contact with hydraulic oil. Any areas of the skin affected
must be rinsed immediately with copious amounts of water.
Failure to adhere to this regulation may result in allergic reactions
or injuries to the eyes.