Diamond Products HCH50 - Manual (Page 33)

Operating instructions Operation
HCH5011 / 001 6-1
6 Operation
6.1 General
Before proceeding read Chapter 2 «Safety instructions»,  2-1 in these
Operating instructions. Be sure also to take note of all the danger
information given here and follow the instructions on how to avoid physical
injury and damage to property.
6.1.1 Safety instructions
It is essential to observe the following safety instructions, in particular in
relation to the operation of the HCH5011.
Danger
Danger of falling heavy parts.
When performing the types of work described in this chapter, it is
essential to wear the following individual protective equipment:
helmet, goggles, protective gloves and safety shoes. (see “Chapter
2” 2.3.7,
 2-4)
It is essential that the work instructions and procedures described
in this safety manual are followed.
Failure to observe this regulation may lead to serious physical
injury, and possibly even death, and to property damage.
Danger
Danger from machine suddenly starting up.
Before switching on the Chain saw HCH5011 the operator must
ensure that no other person is present in the danger areas.
Failure to adhere to this regulation may result in cut wounds to
body parts and damage to property.
Danger
When working with a worn chain there is a danger of the chain
breaking.
Worn chains must be replaced with new ones.
Failure to comply with this regulation may lead to serious physical
injury or death.