Diamond Products HCH50 - Manual (Page 27)

Operating instructions Design and function
HCH5011 / 001 3-5
Direction of travel and position of diamond chain
Ensure the correct position and direction of travel when fitting a chain.
The engraved mark on the chain saw unit is intended as a fitting aid.
Fig. 3-6 Diamond chain position and direction of travel
1. Fitting aid (engraving)
2. Chain direction of travel
3.3.3.2 Function
The diamond chain constitutes the tool for the Chain saw HCH5011. It is
with the help of the chain that the cut is performed.
Danger
Working with an incorrectly fitted chain will reduce the lifetime of
the chain and there is a danger of the chain breaking.
Insert the chain correctly according to the engraved mark.
Failure to comply with this regulation may lead to serious physical
injury or death.
1
2