Diamond Products HCH50 - Manual (Page 16)

Safety instructions Operating instructions
2-2 HCH5011 / 001
2.2 Safety principles
2.2.1 Delimitation of the safety concept
The Chain saw HCH5011 has no effect on the safety concept of the
connected systems, apparatus and installations.
2.2.2 Safety elements
Protection from personal injury is based primarily on a safety concept and
design safety.
2.2.2.1 Passive safety elements
Protection from live parts
All functional units that contain parts which carry hazardous voltages, are
shock-protected by suitable covers.
2.2.3 Removing protective devices
Protective devices should only be removed when the device is turned off,
disconnected from the mains and at a standstill. Safety components in
particular should only be removed and refitted by authorised personnel,
see “Chapter 2”2.6.1,
 2-7.
Before using the Chain saw HCH5011 again, the safety elements must be
checked for correct operation.
2.2.4 Safety measures (organisational)
2.2.4.1 Product monitoring obligation
Operating personnel must notify changes in the operational behaviour or
safety-related components to a responsible person or the manufacturer
immediately.
2.2.4.2 Location of Operating instructions
A copy of theOperating instructions must be available at all times to staff at
the place of use of the apparatus.