Diamond Products HCH50 - Manual (Page 61)

Operating instructions Disposal
HCH5011 / 001 11-1
11 Disposal
11.1 General
The operator can recycle or dispose of the Chain saw HCH5011 himself
provided he observes the statutory provisions. In order to dismantle the
apparatus correctly and to properly remove the materials some knowledge
in the area of mechanics and knowledge about differentiation of waste
materials is necessary.
Before proceeding read Chapter 2 «Safety instructions»,  2-1 in these
operating instructions. Be sure also to take note of all the danger
information given here and follow the instructions on how to avoid physical
injury and damage to property.
11.1.1 Safety instructions
It is essential to observe the following safety instructions, in particular in
relation to the disposal of the HCH5011.
11.1.2 Personnel qualifications
Personnel performing the work described in this chapter must meet the
following conditions:
• Have and understood the safety instructions in “Chapter 2”.
• Completed their technical training (mechanical/electrotechnical)
and be in a position to identify the various material groups.
Danger
Danger of falling heavy parts.
When performing the types of work described in this chapter, it is
essential to wear the following individual protective equipment:
helmet, goggles, protective gloves and safety shoes (see “Chapter
2” 2.3.7,
 2-4).
It is essential that the work instructions and procedures described
in this safety manual are followed.
Failure to observe this regulation may lead to serious physical
injury, and possibly even death, and to property damage.