6 qualification and training – Diamond Products HCH50 User Manual
Page 22
Advertising
Safety instructions
Operating instructions
2-8
HCH5011 / 001
2.6.6
Qualification and training
2.6.6.1
Operator
• A technical trained person in a specialist role.
• Has extensive experience in personnel training and danger assessment.
• Has read and understood the “Safety instructions” chapter.
2.6.6.2
User
• Has completed concrete expert training or has professional experience.
• Has received an introduction (basic training) to operation of the
Chain saw HCH5011 from a service engineer.
• Has read and understood chapter 2 “Safety instructions”.
2.6.6.3
Service engineers
• Specialist professional training (mechanical / electrotechnical).
• Has attended specialist courses at TYROLIT Hydrostress AG.
• Has read and understood the “Safety instructions” chapter.
Advertising