Pach and Company Quantum QC Series Manual - Manual (Page 12)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
A tenant directory consists of directory code (0-9), tenant's name and phone number. Up to 10 tenant directories can be
programmed.
1. Log-in to programming
2.
Enter 01 then #
3.
Enter directory number 0-9 (directory is in single digit and cannot be changed) then #
see Chapter 3 for keypad layout
4.
Enter name up to 16 characters (name can be a person real name, apartment number, etc., directory will be sorted in
alphabetical order ) then press #
5. Enter the tenant phone number up to 16-digit (phone number can be land line number, cellular number or Voice
over IP (VOIP) number. Note: VOIP phones may have problems releasing door) then press #.
Return to step 3 to enter another tenant directory
Function Code 02 - Edit Existing Tenant Directory
1. Log-in to programming
2.
Enter 02 then #, the display will show
3.
Enter tenant directory number to be edited then #