Pach and Company Quantum QC Series Manual - Manual (Page 31)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
11. Enter
0= no more additional time zone then press # and return to step 3 to program another temporary code
1= add additional time zone then press # and return to step 8
* = exit programming
Function Code 38 System Acknowledge
The system will answer incoming outside call after the number of rings set. If the line associated with the system is
connected to fax machine, alarm panel or any answering device. Disable this function.
1. Log-in to programming
2. Enter 38 then #
3. Press
0= disable auto answer
1-9= answer in 1-9 rings
then press #
Function Code 39 Disable and Enable Remote Access
If no remote opening allow, disable it using this function code. Default setting is enabled.
1. Log-in to programming
2. Enter 39 then #
3. Press
0= disable remote access
1= enable remote access (default)
then press #
Function Code 40 DTMF Relay 1
By default the DTMF remote opening relay 1 (door 1) key number is set to 9 means pressing 9 will remotely trigger relay 1