Chapter 6 qwcm – Pach and Company Quantum QC Series Manual User Manual
Page 39
Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
1.
The system must be install in
Intercom and Call Forwarding Mode Wiring Diagram
2.
must be set at least for 1 ring
3.
must be set to 1
4. You must have the system phone number
5. Call the system phone number if the system answered, short beep will be heard.
6. Press # then 4-digit Master code (default is 0000), short beep will be heard if master code is accepted
7. Press * to establish two ways communication
8. Press 9 to release relay 1 (door 1) or 8 to release relay 2 (door 2).
CHAPTER 6
QWCM Internet IP Module
The QWCM is only applicable for QR5IP. Click
here
for complete manual for QWCM
QR5
IP
DEFAULT SETTING
IP: 192.168.1.230
SUBNET: 255.255.255.0
GATEWAY: 192.168.1.1
DNS: 192.168.1.1
USERNAME: Administrator
PASSWORD: 8888