Pach and Company Quantum QC Series Manual User Manual
Page 4
Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
System Descriptions
The Quantum QC Series is multi tenant telephone entry system.
1. Requires an analog dial tone (prefer a dedicated phone line)
2. Capacity 100-600 tenants
Specifications
Input power: 12VAC 40VA (12VAC supplied), 12VDC 3.0A
Minimal Current consumption: 750-100mA
DIMENSION: 6-7/16 (H) x 10 (W) x 2-1/16 (D)
1x16 Liquid Crystal Display (LCD)
Built-in 26 Bit Wiegand Card Reader
RS-485 for Satellite system (up to eight satellite)
Two on-board relays
Two Auxiliary inputs
Operating environment 10ºF-140ºF
Relative Humidity 0%-95% non-condensing
Double 3/4" knock-out on the back and bottom panel
Features
Optional Internet Browser Programming (QWCM on QC1 and QC1FF))
Event recording
Automatic Enrollment
Automatic call forwarding, intercom mode on existing active phone line
QC1-QCIP-QC1FF-QC1IPFF: 100 Tenants, 300 Cards and 300 Codes (4-8 digit code)
QC2IP-QC2IPFF: 250 Tenants, 1000 Cards and 1000 Codes (4-8 digit code)
QC6IP-QC6IPFF: 600 Tenants, 3000 Cards and 600 Codes (4-8 digit code)
20 programmable time zones, 10 programmable auto-unlock schedules and 20 holiday schedules
10 programmable temporary cards and access codes for limited use
10 programmable unlock hold cards and access codes
Program blocks of cards and blocks of codes
Accessories and Replacement parts
Visit our web site
Unpacking the System
All the items below come with the Quantum QC SERIES Contact Pach and Company for missing part(s) at (888) 678-
7224, Monday-Friday 7:30 AM -3:30 PM Pacific Standard Time.