Pach and Company Quantum QC Series Manual - Manual (Page 17)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
see Chapter 3 for keypad layout
4.
Enter name up to 16 characters then press #
5.
Enter door 1 or 2, or 3 for both then press #
6.
Enter time zone 1-3 then press #
7.
Enter 00 ( 24 hours ) - 20 see function code 17 then press #
8.
Enter satellite system ID 0-7 ( enter 0 if no satellite connected to the QR5 ) then press #
9.
Enter
0= no more additional time zone then press # and return to
step 3 to add program another card
1= add additional time zone then press # and return to step 6
* = exit programming
Function Code 11 - Delete Card or Transmitter
1. Log-in to programming
2. Enter 11 then #
3.
Present the card in front of the card reader black window, the number will register automatically (or enter the last 8-
digits of the number on the card) then press #
if card exists