Pach and Company Quantum QC Series Manual - Manual (Page 24)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
1. Log-in to programming
2. Enter 23 then #
3. Enter 1-9 (default=3) then press #
Function Code 24 Alarm
The system will make have warning alarm if invalid code or card has been enter according to the setting on function code
23.
1. Log-in to programming
2. Enter 24 then #
3. Enter
0 = disable, 1 =disable system for 60 seconds and local beep (default setting), 2 = disable system for 60 seconds with
no beep
3 = call directory (0-9) then press #
Function Code 25 Keypad Beep
Turn the keypad press beep On or Off
1. Log-in to programming
2. Enter 25 then #
3. Enter 0= off, 1= On (default) then press #
Function Code 26 Door Beep
Turn the door beep On or Off