Pach and Company Quantum QC Series Manual - Manual (Page 26)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
3. Enter 01-99 (second) then press #
Function Code 33 Temporary Code
The code will be expired after being used a certain amount of times specified (1-10 times) in the programming, Up to 10
temporary codes can be programmed.
1. Log-in to programming
2. Enter 33 then #
3. Enter 0= delete existing temporary code or 1= add temporary code then press #
4. Enter code number 01-10 then press #
5.
Enter 4-8 digit code, see digit setting on function code 09
see Chapter 3 for keypad layout
6. Enter name then press #
7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #
8. Enter time zone set 1-3 then press #