Pach and Company Quantum QC Series Manual - Manual (Page 14)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qc_series_manual.htm[5/19/2014 9:40:29 AM]
3. Do the following:
- Press 1 (to clear all directories) then press #
- Press * to cancel
Function Code 05 - Call Forwarding
Enable or disable call. Default setting= 1 (enable). If 1 (disable) is selected, the system can't make calls
1. Log-in to programming
2. Enter 30 then #
3. Enter 0= disable (default) pr 1= enable then press #
Function Code 06 - Add New Access Code
An access code is a keyless entry code to unlock the door. An access code can be programmed in 4, 5 ,6,7, or 8 digits, see
function code 09 to change the access code s number of digits. Up to 100 access codes can be programmed.
1. Log-in to programming
2.
Enter 06 then #
3.
Enter the access code (4-8 digit, see function code 09 ), then press #
see Chapter 3 for keypad layout
4.
Enter name up to 16 characters, then press #