Chapter 4 programming – Pach and Company Quantum QR Series QR5-QR5FF-QR5IP-QR5IPFF Manual User Manual
Page 15
Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qr5-qr5ip_manual.htm[5/19/2014 9:51:01 AM]
CHAPTER 4
Programming
Log-in to Programming Mode
1. Press 0 and # simultaneously, then release, the welcome screen will stop scrolling.
2. Enter 4-digit master code (default=0000) then press # (if you do not know the master code, see
)
Function Code 00 - Change Master Code
1.
2.
Enter 00 then #
3. Enter new master code then press #
Function code 01 - Add New Tenant Directory
A tenant directory consists of directory code (0-9), tenant's name and phone number. Up to 10 tenant directories can be
programmed.
1.
2.
Enter 01 then #
3.
Enter directory number 0-9
(directory is in single digit and cannot be changed)
then #
see
for keypad layout
4.
Enter name up to 16 characters
(name can be a person real name, apartment number, etc., directory will be sorted in
alphabetical order
) then press #