Pach and Company Quantum QR Series QR5-QR5FF-QR5IP-QR5IPFF Manual - Manual (Page 30)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qr5-qr5ip_manual.htm[5/19/2014 9:51:01 AM]
10. Enter Sat id 0-7 then press # ( enter 0 if no satellite connected to the QR5 )
11.
Enter
0= no more additional time zone then press # and return to
step 3 to program another temporary code
1= add additional time zone then press # and return to step 8
* = exit programming
Function Code 34 Special Code
The code can be use to unlock hold (open hold) and use same code again to lock (close) door or gate. Up to 10 special
codes can be programmed.
1. Log-in to programming
2. Enter 34 then #
3. Enter 0= delete 1= add then press #
4. Enter code 01-10 then press #
5. Enter 4-8 digit code, see digit setting on function code 09
see Chapter 3 for keypad layout
6. Enter name then press #
7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #