Pach and Company Quantum QR Series QR5-QR5FF-QR5IP-QR5IPFF Manual - Manual (Page 40)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qr5-qr5ip_manual.htm[5/19/2014 9:51:01 AM]
Access code Standard Operation is keyless entry code to open the door and door will be closed automatically, see
function code 06
Temporary Code is used for limited number of times, maximum 10 times then the code will be expired, see function code
33
Special Code is used to unlock hold door and then use same code to lock the door, see function code 34
Press * (display will stop scrolling) then press the 4, 5, 6, 7 or 8 digit access code as programmed on Function Code 09
5.4 Opening Door Using Card, Temporary Card, and Special Card
The Quantum QR5-QR5FF-QR5IP-QR5IPFF has built-in card reader. The door can be access using UFOB, UCLAM or
UISO.
Card Standard Operation is used to open the door and door will be closed automatically, see
function code 10
Temporary Card is used for limited of times, maximum 10 times then the card will be expired, see function code 35
Special Card is used to unlock hold door and then use same card to lock the door, see function code 36
Pach and Company UFOB, UCLAM and UISO must be used to have access to the card reader. Other
manufacturers card will not work.
Swipe the card as shown below. The card reader antenna is mounted behind the black square window.
5.5 Opening Door Using Transmitter, Temporary Code Transmitter, and Special Code Transmitter
The Quantum QR5-QR5FF-QR5IP-QR5IPFF has built-in Radio Frequency (RF) Receiver. The transmitter will work in
300 feet radius open air with the transmitter antenna fully extended. The distance may vary depending on the environment.
Transmitter Standard Operation is used to open the door and door will be closed automatically, see
function code 10
Temporary Transmitter is used for limited of times, maximum 10 times then the transmitter will be expired, see function
code 35
Special Transmitter is used to unlock hold door and then use same transmitter to lock the door, see function code 36
Pach and Company RF Transmitter must be used to have access to the card reader. Other manufacturers
transmitter will not work.