Pach and Company Quantum QR Series QR5-QR5FF-QR5IP-QR5IPFF Manual - Manual (Page 32)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qr5-qr5ip_manual.htm[5/19/2014 9:51:01 AM]
see Chapter 3 for keypad layout
6. Enter name and press #
7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #
8. Enter time zone 1-3 then press #
9. Enter 00 ( 24 hours ) - 20 see function code 17 then press #
10. Enter Sat ID 0-7 then press # ( enter 0 if no satellite connected to the QR5 )
11. Enter
0= no more additional time zone then press # and return to step 3 to program another temporary code
1= add additional time zone then press # and return to step 8
* = exit programming
Function code 36 Special Card
The card can be use to unlock hold (open hold) and use same code again to lock (close) door or gate. Up to 10 special
cards can be programmed.
1. Log-in to programming
2.
Enter 36 then #
3. Enter 0= delete 1= add then press #
4. Enter code 01-10 then press #