Pach and Company Quantum QR Series QR5-QR5FF-QR5IP-QR5IPFF Manual - Manual (Page 28)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qr5-qr5ip_manual.htm[5/19/2014 9:51:01 AM]
1. Log-in to programming
2.
Enter 29 then #
3. Enter 01-99 (second) then press #
Function Code 30 Enable Automatic Call Forwarding
1. Log-in to programming
2. Enter 30 then #
3. Enter 0= disable (default) pr 1= enable then press #
Function Code 31 Call Forwarding Time
Intercom call can be forwarded to an outside line (land line, cellular phone) between 15-60 seconds. The call forwarding
time must be set shorter than your voice mail or answering machine answers time otherwise it will not work. Automatic
call forwarding will work if the system calls outside line. Outside line call forwarding is provided by your local telephone
service.
1. Log-in to programming
2. Enter 31 then #
3. Enter 15-60 (second) then press # (30 second= default)
Function Code 32 Forwarding Directory
10 Call forwarding directory can be programmed on the system but only one can be used as call forwarding directory.
1. Log-in to programming
2. Enter 32 then #