Pach and Company Quantum QR Series QR5-QR5FF-QR5IP-QR5IPFF Manual - Manual (Page 25)

Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/qr5-qr5ip_manual.htm[5/19/2014 9:51:01 AM]
5. Enter month and date (i.e. 0704 for U.S.A Independence Day) then press #
Return to step 3 to add more holiday zones.
Function Code 20 - AUXIN1
AUXIN1 is used for input device such as postal lock, infrared sensor, exit button, etc..AUXIN1 is associated with relay 1
1. Log-in to programming
2.
Enter 20 then #
3. Enter
0= disable (default setting)
1= Enable control by relay 1 open door interval, see
function code 28
2= relay 1 control by AUXIN1
then press #
Function Code 21 - AUXIN2
AUXIN2 is used for input device such as postal lock, infrared sensor, exit button, etc.. AUXIN2 is associated with relay 2
1. Log-in to programming
2.
Enter 21 then #
3. Enter
0= disable (default setting)
1= Enable control by relay 2 open door interval, see
function code 29
2= relay 2 control by AUXIN2
then press #
Function Code 22 - Do Not Disturb
If the Do Not Disturb is enabled visitors can't call from the system
1. Log-in to programming
2. Enter 21 then #