E-Mon E32-6003200REZ7KIT - Manual (Page 36)

62-0390-02 36
Fig. 24. Push Buttons.
10.3 How to Program the Display Screens
The display information can be programed using four push buttons switches. The push
buttons (DOWN, UP, SELECT, MENU) are located at the bottom of the display board
on the inside front door of the meter. The buttons are used to program the following:
• Date & Time (This field sets the month, day, year, and time.)
• Device ID (This field changes the default setting, which is 1A for EZ7 and 1 for
ModBus.)
• Reset KW/KWH Read (This field resets the Peak kW Demand to zero.)
M33279
DOWN
UP SELECT
MENU