E-Mon E32-6003200REZ7KIT - Manual (Page 38)

62-0390-02 38
10.3.2 Device I.D.
To change Device I.D., complete the following steps:
1. Press the MENU button.
2. The following screen will appear:
3. Use the UP and DOWN buttons to select the Device ID line.
Press the SELECT button. The Device I.D. screen will appear.
4. Use UP or DOWN button to make changes, press SEL button to advance to the
next field. Press MENU button to return to main menu.
.
5. If changes were made, you’ll be asked to save, press UP or DOWN to select Y or
N; press SEL to proceed returning to main menu. In main menu, select EXIT to
get out of programming mode and return to normal display mode.
Date & Time
Device ID
Reset KW/KWH Read
Exit
EZ7 ID: 1A
MODBUS ID: 2
Save Change? Y