Ransburg Vector Solo 79901 Waterborne RS90-WB - Manual (Page 35)

Vector Solo Waterborne Applicators - Maintenance
31
Ransburg
4. Remove the trigger and fluid hose.
Figure 31: Fluid Hose/Trigger Removal
5. Remove the two (2) jam nuts using the 79793-
00 Removal Tool while holding the needle shaft
with the 79854-00 Special Wrench.
Figure 32: Jam Nut Removal
6. Remove three (3) 5mm screws using a
4mm Allen wrench. Remove the hook.
Figure 33: Barrel Screw Removal
7. Pull the barrel straight away from the handle.
Figure 34: Barrel Removal
AH-08-03.6