Ransburg Vector Solo 79901 Waterborne RS90-WB - Manual (Page 41)

Vector Solo Waterborne Applicators - Maintenance
37
Ransburg
5. Using a dowel rod, push out the air valve
cartridge.
Figure 54: Air Valve Cartridge Removal
6. Remove air valve cartridge seal (black) (see
Figure 53).
7. Remove front air valve seal (white).
Figure 55: Air Valve Cartridge Seal and
Front Seal Removal
Figure 57: Cartridge Seal Replacement
2. Install the air valve cartridge seal.
Figure 56: Air Valve Seal Replacement
† If you remove the air valve seal, it is
highly recommended that it is replaced.
NOTE
Handle Rebuild
1. Install the front air valve seal using the
Special Tool.
1 - 6mm (1/4") Dowel
1 - Rear Seal
2 - Air Valve Cartridge Seal
3 - Front Air Valve Seal
1 - 79793-00 Jam Nut Tool
2 - Front Air Valve Seal - Concave Side to Tool
† Only remove the front air valve seal
(item 3) if there is damage or wear to the
seal causing leakage.
NOTE
AH-08-03.6