Ransburg Vector Solo 79901 Waterborne RS90-WB - Manual (Page 40)

Vector Solo Waterborne Applicators - Maintenance
36
Ransburg
4. Remove the rear seal.
Figure 53: Rear Seal Removal
Figure 51: Power Module Removal
† The power modules are not service-
able.
NOTE
3. Pull the module straight off the handle.
Figure 50: Power Module Removal
2. Remove three (3) bolts using a 3mm Allen
wrench.
Handle Disassembly
1. Remove barrel.
2. Remove power module.
3. Push air valve out.
Figure 52: Air Valve Removal
1 - Push Out From Here
AH-08-03.6