Ransburg RMA Indirect A12869 - Manual (Page 13)

RMA-303 Indirect Charge - Introduction
LN-9268-11.4 8
INTRODUCTION
FEATURES
Features which make the RMA-303 advanta-
geous for use in electrostatic applications in-
clude:
•
Assembly components made of durable
engineered resin material for optimum me-
chanical strength and solvent resistance.
•
Heavy duty design ensures excellent ser-
vice life even when subjected to the quick
motions of robotic applications.
•
Proven long life turbine motor capable of
speeds up to 70 krpm. (See Specifica-
tions" in the "Introduction" section of this
manual for bell cup speed ratings.)
•
Serrated and non-serrated bell cups are
available for application flexibility and color
match. All bell cups are made using Tita-
nium material.
•
Aerodynamic design for ease of cleaning
external surfaces.
•
60 o angled body provides more maneuver-
ability and facilitates robotic programming.
•
Speed control uses reliable magnetic
pickup for fiber optic transmission of rota-
tional speed data.
•
Fast color changes are achieved using
center feed fluid delivery and the fluid
valves which provide for simultaneous
paint push out while solvent washes the
feed tube and bell cup interior.
•
Heated bell wash material is recirculated at
the robot plate. Internal solvent and air
valves provide for a fast solvent/air chop
method to quickly and efficiently clean the
interior and exterior of the bell cup.
•
Less waste to the spray booth, with the
dump valve located internally next to the
feed tube.
•
Compact high voltage control system. The
MicroPak cascade control takes only 1/4 of
the space in a 19-inch Euro rack, leaving
room for additional control modules.
•
Various adapter plates available to match
most robotic mounting configurations.
•
Large range of fluid tip sizes available.