Ransburg RMA Indirect A12869 - Manual (Page 98)

RMA-303 Indirect Charge - Parts Identification
93 LN-9268-11.4
NOTE:
A11351-03 - Install between rear of turbine manifold and valve assembly.
A11351-04 - Install between valve manifold assembly and shaping air manifold.
Figure 66: A11351-03/04 Cup Wash Line Assembly
Figure 67: A12874-07 Shaping Air Kit
(Mono-Flex Shape Air)
Figure 68a: A12874-10/-11 Shaping Air Kit
(Dual-Flex Shape Air)
79001-37 (REF.)
O-RING
79001-11
O-RING
A12068-03
OUTER SHROUD
(MONO-FLEX SHAPE AIR)
A12083-02
SHAPING AIR RING
(MONO-FLEX SHAPE AIR)
A12078-02
TURBINE RETAINING RING
(MONO-FLEX SHAPE AIR)
79001-37 (REF.)
O-RING
79001-11 (REF.)
O-RING
79001-54 (REF.)
O-RING
A12074-03 BLACK PLASTIC FOR A12874-10
A12932-00 PTFE FOR A12874-11
OUTER SHROUD
(DUAL-FLEX SHAPE AIR)
A12084-02
SHAPING AIR RING
(DUAL-FLEX SHAPE AIR)
A12871-02
INNER SHAPING AIR RING
(DUAL-FLEX SHAPE AIR)
A12066-02
TURBINE RETAINING RING
(DUAL-FLEX SHAPE AIR) 79001-11
O-RING
79001-54 (REF.)
O-RING
79001-11 (REF.)
O-RING
79001-37 (REF.)
O-RING
A13116-02 BLACK PLASTIC
OUTER SHROUD
(DUAL-FLEX SHAPE AIR)
A13229-02
SHAPING AIR RING
(DUAL-FLEX SHAPE AIR)
13228-02
INNER SHAPING AIR RING
(DUAL-FLEX SHAPE AIR)
A12066-02
TURBINE RETAINING RING
(DUAL-FLEX SHAPE AIR) 79001-11
O-RING
Figure 68b: A12874-13 Shaping Air Kit
(Dual-Flex Shape Air for A13114-XX 55mm Bell Cup)