Ransburg RMA Indirect A12869 - Manual (Page 82)

RMA-303 Indirect Charge - Maintenance
77 LN-9268-11.4
Do not attempt to hold a rag or a gloved hand
against the bell edge to stop or slow down a ro-
tating bell.
Do not attempt to clean the bell edge while the
bell is rotating.
Do not attempt to use sharp or abrasive materi-
als to clean the bell, which will scratch or dam-
age the bell.
Do not attempt to place a high voltage probe on
the bell edge unless rotation is full stopped.
Do not reuse an atomizer bell that shows signs
of damage such as nicks, heavy scratches,
dents, or excessive wear (defined under "Bell
Cup Cleaning" in the "Maintenance" section).
OPERATOR / MAINTENANCE
***WARNINGS***