Ransburg RMA Indirect A12869 - Manual (Page 15)

RMA-303 Indirect Charge - Introduction
LN-9268-11.4 10
Atomizer module pneumatically controls the
speed of the rotary atomizer with dynamic
feedback through a fiber optic transmitter lo-
cated on the applicator. A Serial Digital mod-
ule pneumatically controls the paint, solvent,
and dump valves located on the atomizer. An
I/O module provides communication between
these modules and the PLC.
The above modules are mounted in one 19
inch rack and interconnected through a com-
mon mother board.