Specifications, Rma-303 indirect charge - introduction – Ransburg RMA Indirect A12869 User Manual
Page 16
RMA-303 Indirect Charge - Introduction
11
LN-9268-11.4
Electrical
Power Supply
Type:
MicroPak
Charging Method:
Indirect
Output Voltage:
30-70 kV Variable
Output Current:
1000 µA
Turbine Speed Control:
Atomizer Module
Part Spray ability:
Determine spray ability of part to be coated using Test Equip-
ment (76652)
(See current Paint, High Voltage & SCI Test Equipment Service Manual).
Mechanical
Length:
(See Figure 1)
Diameter:
(See Figure 1)
Approximate Weight:
Atomizer Only:
18.4 lbs. (8.43 Kg)
Total Payload:
21.08 lbs. (9.6 Kg)
Turbine Type:
Air Bearing Impulse Drive
Turbine Air Supply:
Variable
Maximum/Minimum
Turbine
Speed:
Continuous
All Bell Cups:
70K rpm max./ 20K rpm min.
Bearing Air Supply:
90 psig (±10 psi)
(Nominal):
(621 kPa ±69 kPa) 2.9 SCFM (82 slpm
)
SPECIFICATIONS*