IAI America RCAW - Manual (Page 43)

1. Specifications Check
37
1.3.15 Rear Trunnion (Model No. : TRR)
This bracket is used to make the cylinder follow up when the movement of an object attached on the tip
of the rod is different from the direction of rod movement. Attach on the rod.
9.5
3 3
SE
49 st
8
40
83
10
73
103
40
64.3
10
55
18
φ32 φ42 φ35
Model code of single product
RCA-TRR-RA3
For RCA-RA3□
Bracket A
Bracket B
2-φ6.8
M26×1.5
(Effective screw range = 15.5)
M8×1.25 (Effective screw range = 16)
φ16 (ROD O/D)
14(Width
across Flats)
32(Width across Flats)
Nut A
40(Width across Flats)
Home
Nut C
ME
ME
3
ME
ME
9
56 st
SE
9.5 107
77
40
20
22
10
10
40
87
66.5
φ37
Model code of single product
RCA-TRR-RA4
For RCA-RA4□
φ20 (ROD O/D)
M10×1.25 (Effective screw range = 20)
M40×1.25
(Effective screw range = 17.5)
36(Width across Flats)
47(Width across Flats)
Nut A
19(Width across Flats)
Home
Nut C
Caution: Use the guide equipped type or attach the external guide so that any load is given to the rod
other than in the forward direction, when the trunnion is attached and the rod is moved.