IAI America RCAW - Manual (Page 53)

2. Installation
47
(3) Using screws on feet (optional)
Optional feet are available for installing the actuator. Use these feet, if necessary.
z Applicable models: All models
Mating material is steel Mating material is aluminum
Screw size M6 M6
Tightening torque 12.3 N•m 5.4 N•m
Caution: Affix the actuator using two feet (optional), one in the front and the other in the back.
If affixed using only one foot in the front or back, the actuator may be negatively
affected due to insufficient rigidity.
Straight type
Mounting hole
Affixing nut
Foot A
Affixing nut
Affixing nut
Mounting hole
Foot B
Reversing type
Mounting hole Mounting hole
Affixing nut
Foot
Foot