IAI America RCAW - Manual (Page 49)

2. Installation
43
2.3 How to Installation
This chapter explains how to install the actuator on your mechanical system.
2.3.1 General Rules on Installation
Follow the information below when installing the actuator, as a rule.
Do pay attention to these items (except with custom-order models).
{ : Available u : Not available
Horizontally Oriented Mount Vertical Mount
ż ż
Caution: When the unit is installed vertically oriented, attempt to put the motor up unless there
is a special reason. Putting the motor on the lower side would not cause a problem in
an ordinary operation. However, it may rarely cause a problem, when it is not
operated for a long period, depending on the surrounding environment (especially
high temperature), caused by the grease being separated and the base oil flowing into
the motor unit.