IAI America NS - Manual (Page 59)

45
1
1. Maintenance
11.6.2 How to Add Grease
(1) Small type: SXMS, SXMM, SZMS, SZMM
Medium type: MXMS, MXMM, MXMXS, MZMS, MZMM
A grease nipple is provided inside the home-side stopper of the slider, so add grease from this grease
nipple.
[1] Use an Allen wrench of 1.5 mm in width across flats to remove the two screws and take out the end
cover on the home side.
[2] Move the slider all the way to the home side.
[3] Insert a grease gun into the hole provided at the end bracket, secure the slider so that it won’t move,
and then add grease. (For the specific positions, see the figures on the next page.)