IAI America NS User Manual
Page 61
Advertising
47
1
1. Maintenance
(2) Large type: LXMS, LXMM, LXMXS, LZMS, LZMM
Two grease nipples are found, one each on the right and left sides of the slider. Apply grease from
these nipples.
[1] Using a grease gun, apply grease from the grease nipples located on the end faces of the slider.
(Refer to the figure below for the positions of grease nipples.)
Grease nipple positions on the slider
[2] Move the slider back and forth several times by hand.
[3] Repeat the above steps to apply more grease.
[4] Use a waste cloth, etc., to wipe off grease that has overflowed from the slider.
Advertising