IAI America IX-INN8040 - Manual (Page 47)

41
6. Inspection/Maintenance
(5) Affix the cover (base) using the countersunk head screws [1] (six pieces) (tightening torque: 0.74
Nm).
 When installing the cover (base), be careful not to pinch the cables inside.
[1] 6 - M3 x 8
Do not tighten the screws to the specified torque in one go. First
tighten the screws to the position shown to the left, and while
pushing the cover in the direction of the arrow tighten the screws
on both sides evenly to ensure tight sealing.
Caution