IAI America TT-C3 - Manual (Page 21)

11
INTELLIGENT ACTUATOR
Chapter 1 Installation
Chapter
1
Installation
Caution
1.3 Safety Precautions
This system product was developed as a drive unit for an automated machine, etc., and as such the
maximum torque and speed are limited to levels acceptable for an automatically driven machine.
However, strict observance of the following items is requested to prevent unforeseen danger.
1. Do not handle this product in manners not specified in this manual. If you have any question
regarding the content of this manual, please contact IAI.
2. Do not enter the operation area of the machine while the machine is operating or ready to operate
(the controller power is on). If the machine is used in a place accessible to other people, provide an
appropriate safety measure such as enclosing the machine with a cage.
3. When assembling/adjusting or maintaining/inspecting the machine, always turn off the controller
power at the source beforehand. The operator should display in a conspicuous place a plate or
other sign saying that operation is in progress and that the power should not be turned on. The
operator should keep the entire power cable beside him or her to prevent another person from
inadvertently plugging in the cable.
4. When two or more operators are to work together, set call-out signals to ensure safety of all
personnel during the work. In particular, a person turning on/off the power or moving an axis either
via a motor or manually must always say what he or she is going to do out loud and confirm the
responses from the others first before actually performing the operation.