IAI America TT-C3 - Manual (Page 263)

253
INTELLIGENT ACTUATOR
Appendix
Appendix
3. Positioning to Five Positions
Description
Causes the actuator to move to positions 1 to 5 at a speed of 100 mm/sec following a home return.
Only axis 1 is used.
Application program Position data
x For the actuator to operate, a home return must have been completed
and a speed must be set.
x The actuator moves to the position data coordinates specified by the
movement commands.
Flowchart
Start
Home return
Set speed
Move to P1
Program ends
Move to P2
Move to P3
Move to P4
Move to P5