IAI America TT-C3 - Manual (Page 4)

1. Notes on operation
To prevent pinching of fingers, do not bring your fingers near the following areas where a warning label is
attached while the actuator is moving.
2. Installation of safety cage
It is strongly recommended that the robot be enclosed by a safety cage to ensure safety of the operator. When
the robot is enclosed by a safety cage, the robot will satisfy the Machine Directives regardless of how it is used
by the operator.
3. The maximum sound pressure level of this robot is 76.4 dB.
4. After grease has been applied to the guide and ball screw during maintenance and
inspection, be sure to install the covers.
[Gate type] [Cantilever type]
Warning label
m Enclose by a safety cage.