LevelOne GTL-2690 - Manual (Page 141)

User Authentication
6-6
6
• The following web browsers and operating systems currently support HTTPS:
• To specify a secure-site certificate, see “Replacing the Default Secure-site
Certificate” on page 6-7.
Command Attributes
HTTPS Settings
• HTTPS Status – Allows you to enable/disable the HTTPS server feature on the
switch. (Default: Enabled)
• Change HTTPS Port Number – Specifies the UDP port number used for HTTPS/
SSL connection to the switch’s web interface. (Default: Port 443)
Copy HTTPS Certificate
For more information on this function, see “Replacing the Default Secure-site
Certificate” on page 6-7.
Web – Click Security, HTTPS Settings. Enable HTTPS and specify the port number,
then click Apply.
Figure 6-3 HTTPS Settings
CLI – This example enables the HTTP secure server and modifies the port number.
Table 6-1 HTTPS System Support
Web Browser Operating System
Internet Explorer 5.0 or later Windows 98,Windows NT (with service pack 6a),
Windows 2000, Windows XP
Netscape 6.2 or later Windows 98,Windows NT (with service pack 6a),
Windows 2000, Windows XP, Solaris 2.6
Mozilla Firefox 2.0.0.0 or later Windows 2000, Windows XP, Linux
Console(config)#ip http secure-server 25-12
Console(config)#ip http secure-port 441 25-13
Console(config)#