Table 28-2, Show lacp counters - display description – LevelOne GTL-2690 User Manual

Page 537

Advertising
background image

Link Aggregation Commands

28-8

28

Example

Console#show lacp 1 counters
Port Channel: 1
-------------------------------------------------------------------------
Eth 1/ 2
-------------------------------------------------------------------------
LACPDUs Sent : 12
LACPDUs Receive : 6
Marker Sent : 0
Marker Receive : 0
LACPDUs Unknown Pkts : 0
LACPDUs Illegal Pkts : 0
.
.
.

Table 28-2 show lacp counters - display description

Field

Description

LACPDUs Sent

Number of valid LACPDUs transmitted from this channel group.

LACPDUs Received

Number of valid LACPDUs received on this channel group.

Marker Sent

Number of valid Marker PDUs transmitted from this channel group.

Marker Received

Number of valid Marker PDUs received by this channel group.

LACPDUs Unknown Pkts Number of frames received that either (1) Carry the Slow Protocols Ethernet

Type value, but contain an unknown PDU, or (2) are addressed to the Slow

Protocols group MAC Address, but do not carry the Slow Protocols Ethernet

Type.

LACPDUs Illegal Pkts

Number of frames that carry the Slow Protocols Ethernet Type value, but contain

a badly formed PDU or an illegal value of Protocol Subtype.

Console#show lacp 1 internal
Port Channel : 1
-------------------------------------------------------------------------
-----
Oper Key : 3
Admin Key : 0
Eth 1/ 1
-------------------------------------------------------------------------
-----
LACPDUs Internal : 30 seconds
LACP System Priority : 32768
LACP Port Priority : 32768
Admin Key : 3
Oper Key : 3
Admin State : defaulted, aggregation, long timeout, LACP-activity
Oper State : distributing, collecting, synchronization,
aggregation,
long timeout, LACP-activity
.
.
.

Advertising