Table 42-7, Show ip rip - display description – LevelOne GTL-2690 User Manual
Page 730
Routing Information Protocol (RIP)
42-17
42
Example
Console#show ip rip configuration
Interface SendMode ReceiveMode Poison Authentication
--------------- --------------- ------------- -------------- ------------------
10.1.0.253 rip1Compatible RIPv1Orv2 SplitHorizon noAuthentication
10.1.1.253 rip1Compatible RIPv1Orv2 SplitHorizon noAuthentication
Console#show ip rip status
Interface RcvBadPackets RcvBadRoutes SendUpdates
--------------- --------------- -------------- ---------------
10.1.0.253 0 0 13
10.1.1.253 0 0 13
Console#show ip rip peer
Peer UpdateTime Version RcvBadPackets RcvBadRoutes
--------------- ------------ --------- --------------- --------------
10.1.0.254 1625 2 0 0
10.1.1.254 1625 2 0 0
Console#
Table 42-7 show ip rip - display description
Field
Description
show ip rip configuration
Interface
IP address of the interface.
SendMode
RIP version sent on this interface (none, RIPv1, RIPv2, or RIPv2-broadcast)
ReceiveMode
RIP version received on this interface (none, RIPv1, RIPv2, RIPv1 or RIPv2)
Poison
Shows if split-horizon, poison-reverse, or no protocol message loopback
prevention method is in use.
Authentication
Shows if authentication is set to simple password
, MD5,
or none.
show ip rip status
Interface
IP address of the interface.
RcvBadPackets
Number of bad RIP packets received.
RcvBadRoutes
Number of bad routes received.
SendUpdates
Number of route changes.
show ip rip peer
Peer
IP address of a neighboring RIP router.
UpdateTime
Last time a route update was received from this peer.
Version
Whether RIPv1 or RIPv2 packets were received from this peer.
RcvBadPackets
Number of bad RIP packets received from this peer.
RcvBadRoutes
Number of bad routes received from this peer.