LevelOne GTL-2690 - Manual (Page 441)

System Management Commands
23-38
23
Default Setting
16 seconds
Command Mode
Global Configuration
Example
Related Commands
sntp client (23-36)
sntp update-time
This command sends a request to the configured SNTP servers to immediately
update the time.
Command Mode
Global Configuration
Example
Related Commands
sntp client (23-36)
sntp server (23-37)
show sntp
This command displays the current time and configuration settings for the SNTP
client, and indicates whether or not the local time has been properly updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for sending
time synchronization requests, and the current SNTP mode (i.e., unicast).
Example
Console(config)#sntp poll 60
Console#
Console(config)#sntp update-time
Console(config)#
Console#show sntp
Current time: Dec 23 05:13:28 2002
Poll interval: 16
Current mode: unicast
SNTP status : Enabled
SNTP server 137.92.140.80 0.0.0.0 0.0.0.0
Current server: 137.92.140.80
Console#