LevelOne GTL-2690 - Manual (Page 447)

System Management Commands
23-44
23
Example
calendar set
This command sets the system clock. It may be used if there is no time server on
your network, or if you have not configured the switch to receive signals from a time
server.
Syntax
calendar set hour min sec {day month year | month day year}
• hour - Hour in 24-hour format. (Range: 0 - 23)
• min - Minute. (Range: 0 - 59)
• sec - Second. (Range: 0 - 59)
• day - Day of month. (Range: 1 - 31)
• month - january | february | march | april | may | june | july | august |
september | october | november | december
• year - Year (4-digit). (Range: 2001 - 2100)
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows how to set the system clock to 15:12:34, February 1st, 2002.
show calendar
This command displays the system clock.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show clock
Time Zone : GMT-0930-Taiohaer
Summer Time : offset 60 minutes
Apr 1 2007 23:23 to Apr 23 2007 23:23
Summer Time in Effect : No
Console#
Console#calendar set 15 12 34 february 1 2002
Console#
Console#show calendar
15:12:34 February 1 2002
Console#