LevelOne GTL-2690 - Manual (Page 256)

Displaying LLDP Remote Information Details
12-9
12
CLI – This example displays LLDP information for remote devices attached to this
switch which are advertising information through LLDP.
Displaying LLDP Remote Information Details
Use the LLDP Remote Information Details screen to display detailed information
about an LLDP-enabled device connected to a specific port on the local switch.
Field Attributes
• Local Port – The local port to which a remote LLDP-capable device is attached.
• Chassis Type – Identifies the chassis containing the IEEE 802 LAN entity
associated with the transmitting LLDP agent. There are several ways in which a
chassis may be identified and a chassis ID subtype is used to indicate the type of
component being referenced by the chassis ID field. (See Table 12-1, “Chassis ID
Subtype,” on page 12-5.)
• Chassis ID – An octet string indicating the specific identifier for the particular
chassis in this system.
• Port Type – Indicates the basis for the identifier that is listed in the Port ID field.
• Port Description – A string that indicates the port’s description. If RFC 2863 is
implemented, the ifDescr object should be used for this field.
• Port ID – A string that contains the specific identifier for the port from which this
LLDPDU was transmitted.
• System Name – An string that indicates the system’s configures assigned name.
Console#show lldp info remote-device 32-16
LLDP Remote Devices Information
Interface | ChassisId PortId SysName
--------- + ----------------- ----------------- ---------------------
Eth 1/1 | 00-01-02-03-04-05 00-01-02-03-04-06
Console#
Table 12-3 Port ID Subtype
ID Basis Reference
Interface alias IfAlias (IETF RFC 2863)
Chassis component EntPhysicalAlias when entPhysClass has a value of ‘chassis(3)’ (IETF RFC 2737)
Port component
EntPhysicalAlias when entPhysicalClass has a value ‘port(10)’ or ‘backplane(4)’
(IETF RFC 2737)
MAC address MAC address (IEEE Std 802-2001)
Network address networkAddress
Interface name ifName (IETF RFC 2863)
Agent circuit ID agent circuit ID (IETF RFC 3046)
Locally assigned locally assigned